The MD 421 II continues the tradition of the MD 421, which has been one of Sennheiser's most popular dynamic mics for over 35 years. The large diaphragm, dynamic element handles high sound pressure levels, making it a natural for recording guitars and drums. The MD 421's full-bodied cardioid pattern and five-position bass control make it an excellent choice for most instruments, as well as group vocals or radio broadcast announcers. One listen and you'll know why it's a classic.
Rugged professional microphone
Five position bass roll-off switch
Effective feedback rejection
Clear sound reproduction
Easy handling due to pronounced directivity
Recored a 50's sounding Christmas album and on the bass, we used a Sennheiser 421! Ideal. See & hear here! https://www.youtube.com/watch?v=a5UnC5-r6js
Case 340x125x60mm, black
Case for MD 421 microphonesLearn more
MD 421 CLAMP, BLACK MZA 421
MIC CLAMP, BLACKLearn more
The MD 421-II is a dynamic microphone and does not require 48V Phantom Power to operate.
It is a common saying that dynamic microphones just have no maximum SPL.
This saying is not technically exactly correct but for every day use of dynamic microphones you will not find gain limitations. At SPL levels above 160 dB some mechanical problems might occur (for example the voice coil might crash onto the magnet) but these SPL levels are very hard to find in real world.
Here at Sennheiser we use dynamic microphones for distortion measurements on loudspeakers at very high sound pressure levels. At Sennheiser we have measured the SPL and THD inside a large 2" driver/horn combination with a MD 421. The max SPL this combination was able to produce was 150 dB and the THD level recorded by a MD 421 was below 1% (produced by the driver not by the mic)So as a conclusion we can state the MD 421-II has no maximum SPL limitations for practical use. However if using dynamic microphones at high SPL levels a user should be aware that the very high voltage (up to several volts) delivered by the microphone might cause problems when connected to mic preamps.