MKH 20-P48
Omni-directional RF condenser microphone. Ideal as a main microphone for orchestras and solo instruments. Picks up the natural acoustics of the room. Exceptionally low inherent self-noise. Light metal body.
Article No. 002857
Find a dealer
MKH 20-P48
Find a dealer

Omni-directional condenser microphone.

  • Microphone with omni-directional pick-up pattern

  • Exceptionally low inherent self-noise

  • Exceptionally flat frequency response, switchable for near and diffuse field applications

  • High frequency response can be accentuated by means of a special pressure build-up ring

  • Slightly increasing directivity at high frequencies to adjust tonal balance

  • High sensitivity

  • Switchable pre-attenuation

Reviews
Be the first to write a review.
Specifications
  • Dimensions
    Ø 25 x 153 mm
  • Frequency response (Microphone)
    12 - 20000 Hz
  • Max. sound pressure level
    134 dB / 1 kHz
  • Sensitivity in free field, no load (1kHz)
    25 mV/Pa +- 1 dB
  • Nominal impedance
    150 Ω
  • Equivalent noise level
    10 (18) dB
  • Equivalent noise level weighted as per CCIR 468-3
    20 (28) dB
  • Current consumption
    2 mA
  • Battery Specification
    48 +- 4 V Phantom
What's in the Box
  • 1 MKH 20
  • 1 MZS 40 shock mount
  • 1 MZW 41 windshield
  • 1 pressure build-up ring
Accessories

Support
Contact Us
Product Contact
Product Support Phone

1-(877)-736-6434

Downloads

  • Spec Sheets
    • Product specification MKH 20-P48 (110 KB) Download

  • EU Declaration of Conformity
    • EU Declaration of conformity MKH series (220 KB) Download

  • Instruction Manual
    • Instruction manual MKH 20-P48 (1.1 MB) Download

    • Manual Windscreens and Accessories (1.8 MB) Download

  • Digital Brochures
  • Quick Guides



WARNING (for California residents only): This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects and other reproductive harm. For more information go to: www.p65warnings.ca.gov.

CONSUMER ALERT FOR WIRELESS MICROPHONE SYSTEMS
Most users do not need a license to operate a wireless microphone system. Nevertheless, operating a microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones