1. Home
  2. Business Communication Solutions
  3. SI 1015
SI 1015
The SI 1015 wideband modulator uses the new extremely reliable carrier frequencies 2.3 and 2.8 MHz and can be operated in single-channel, two-channel and stereo modes.
Article No. 004252
Find a dealer
SI 1015
Find a dealer

The SI 1015 wideband modulator offers single-channel, two-channel and stereo operation in 2.3 / 2.8 MHz. The modulator features two balanced XLR-3 audio inputs, level controls, and IR monitoring diodes. The SZI 1015 and SZI 1029 emitters connect easily via the two BNC outputs or barrier strip.

Please note: NT1015-120 power supply ordered separately.

  • 2-Watt radiator and modulator for the new carrier frequencies 2.3 and 2.8 MHz

  • Maximum coverage area of 400 m²

  • Chaining the signal to additional radiators

  • Modulator for single-channel, two-channel or stereo operation, features monitoring diodes and a separate barrier strip with RF and DC outputs for connecting radiators

  • Wide range of mounting accessories for the radiator, modulator comes complete with rack-mount ears

Newsletter subscription

Reviews
Be the first to write a review.
Specifications
  • Impedance
    600 Ohm
  • Dimensions
    1/2 19", 1 RU (8.8 x 1.7 x 6.8 in)
  • Audio-XLR connector
    2 x XLR-3 symmetric
  • Weight
    1.76 lbs
  • Peak deviation
    +/- 56 kHz
  • Nominal deviation
    +/- 40 kHz
  • Modulation
    FM
  • Carrier frequencies
    2.3 MHz / 2.8 MHz
  • Current consumption
    <140 mA
  • Operating voltage (mains)
    24-30 V DC
  • Input voltage range
    10 mV.....5 V (Line)
  • RF output
    2 x BNC
What's in the Box
  • SI 1015, two rack-mount ears

Support
Contact Us
Product Support Phone

1-(877)-736-6434

Downloads

  • Technical Drawings
    • Outline dimensions SI 1015-NT (DXF) (1.9 MB) Download

    • Outline dimensions SI 1015-NT (SAT) (2 MB) Download

  • Instruction Manual
    • Instruction manual SI 1015, SZI 1015 (830 KB) Download

  • Spec Sheets
    • Product specification SI 1015 (170 KB) Download

  • Safety instructions and regulatory information
    • Safety Instructions - SI 1015 | SZI 1015 | SZI 1029 | SZI 30 | SI 30 (1.5 MB) Download

  • Quick Guides
    • Quick guide SI 1015, SZI 1015-T, SZI 1015, SZI 1029 (1.5 MB) Download

  • Technical Information
    • Infrared System Configuration (1.3 MB) Download

  • EU Declaration of Conformity
    • EU Declaration of Conformity - SI/SZI Infrared system (2 MB) Download




WARNING (for California residents only): This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects and other reproductive harm. For more information go to: www.p65warnings.ca.gov.

CONSUMER ALERT FOR WIRELESS MICROPHONE SYSTEMS
Most users do not need a license to operate a wireless microphone system. Nevertheless, operating a microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones