AC 3
Antenna Combiner
Article No. USAC3/NT
Find a dealer
AC 3
Find a dealer

Operates up to four wireless monitoring transmitters from the ew series using one shared antenna.
Power is supplied to the SR 300 IEM G3 transmitters over the BNC cables, eliminating separate power supplies for the transmitters

Active antenna combiner with DC power distribution for IEM transmitters, includes required NT3-1-US power supply and four 20" BNC cables

Reviews
Be the first to write a review.
Specifications
  • Impedance
    50 Ohm
  • Weight
    2030 g
  • RF frequency range
    500 ..... 870 MHz
  • Operating voltage (stand alone)
    13,8 V DC
  • Transmission loss
    0 dB
What's in the Box
  • 1 AC 3 antenna combiner
  • 4 BNC cables
  • Operating instructions
  • 1 NT3-1-US Power Supply

Support
Contact Us
Product Contact
Product Support Phone

1-(877)-736-6434

Downloads

  • Technical Drawings
    • Outline dimensions AC 3 (DXF) (6.4 MB) Download

    • Outline dimensions AC 3 (DWG) (1.8 MB) Download

  • Instruction Manual



WARNING (for California residents only): This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects and other reproductive harm. For more information go to: www.p65warnings.ca.gov.

CONSUMER ALERT FOR WIRELESS MICROPHONE SYSTEMS
Most users do not need a license to operate a wireless microphone system. Nevertheless, operating a microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones